Advantages Of Using Cold Forming Machine And Maintenance Required

Machinery industry is not only an important part of equipment industry, but also an important foundation, strategy and pillar industry in China. Its production capacity directly determines the level of the whole manufacturing industry. In 2011, the machinery industry introduced, digested and absorbed foreign advanced technology. Technical support enterprises. Innovation and solving key technical problems have greatly enhanced the ability of independent innovation.

Combined with the construction of major projects and the development needs of key industries, China's machinery industry has developed many important technical equipment with independent intellectual property rights: metal forming hydraulic press and superplastic high-temperature forming hydraulic press, which has accelerated the process flow. Independent production. The main technical equipment y has greatly improved the affordability of the national economy of the equipment.

It is expected that the development direction of cold-formed section steel mill in the future will be to improve dies and equipment, improve data performance, study the orientation of neutral axis of rolling mill, improve product standards and product planning, bending and data.

1. Protection and repair of drum. Antirust oil needs to be added to the roll every ten days or so. When the equipment is not used for a long time, the roll shall also be coated with anti rust oil.

2. Protection and maintenance of tools and molds. Friction will occur in the tool mould, and the smooth oil will be added every half an hour in the production process to prevent the accelerated wear of the tool. In addition, when the cutting burr is found to be too large and unsatisfactory, it is because the blade is not sharp enough, so it should be handled in time. Otherwise, if it is too serious, the blade or abrasive may be damaged. For details on how to make the tool sharper, please refer to the following methods: what are the treatment methods of cold bending burr?

3. Protection and maintenance of stamping die. The protection of the die is the same as that of the knife die. When it is found that the die is not sharp enough, the die needs to be flattened to make it more sharp.