Slitting and Cut To Length Line
The design of Slitting and Cut to Length Line is mainly used in the hardware and building materials market. It is often used in the matching molding machine.
Product Introduction
1. Introduction From Reliance （Xiamen）Industry Co.，Ltd
The design of Slitting and Cut to Length Line is mainly used in the hardware and building materials market. It is often used in the matching molding machine. Because the whole line is relatively economical and practical, and does not require digging for production, the general molding industry will be equipped with such a set of equipment. And it will not waste offcuts, and all the cut rolls can be used reasonably.
2. Specifications/Technical parameters
MATERIAL REQUEST | Material: 0.4mm Minimum Thickness, 3.0 mm Maximum Thickness Note: Max. Slitting thickness 2.0mm, Max. Cutting thickness:3.0mm Feeding width: Max. 1250mm Ex Cold Rolled Coil, Galvanized Coil, G300MPa& G550MPa |
7Ton*1250mm Hydraulic un-coiler with coil car & pneumatic holder (Max. speed=20mpm) | Hydraulic system expand coil inner hole, Pump motor: 4KW Frequency Inverter to regulate turning speed, Motor: 5.5KW, with braking system Taper-wedge expanding system Load capacity = Max.7Tons Coil Inner-diameter=508±30 mm, Coil width = Max.1250mm Automatic stopping device with limited switch as assistance to control stop/star rotation Pneumatic holder on the top for the sake of coil loosen, air resource shall be provided the customer. __With coil cart Up/Down stroke of Coil Car: Max. 400mm; 2 pieces of hydraulic cylinder work Forward/backward stroke of Coil Car: Max. 3000mm, Motor=1.5KW |
Straightening, Shearing & Slitting machine | A. Hydraulic support table for manual feeding purpose. Manual control B. Feeding Section with guide device NOTE: One side fixed the other size adjustment for exact feeding width: C. One set of Film-on device for raw material required for protection purpose. D. Straightening Device with 5 over 4 shafts to remove the Coil-set Note: Upper leveler & lower leveler with heave plate to support Pinch rolls before strengthener, Diameter of Guiding Shaft=115mm, Upper rolls coated with rubber which it’s suitable for film-on during the working. Straighten shaft diameter 115mm Leveling Working width: MAX.1250mm; Thickness: 0.4-3.0mm Working speed=0~15m/min Above leveling gaps adjustable via corkscrew lifter device Hand wheel design with manual height adjustment E. Slitting thickness=0.4~2.0mm Slitting motor: 11KW, Frequency speed control Slitting width adjustable by manual Total six sets slitting tools, one time can cut for 7 slits Slitter material: Cr12，HRC58-62 Slitting width tolerance ≤0.5mm Spacing of slitter: 150-1250mm The slitter adopted for quick change construction, it will be tighten after the change. The steel gauge ruler for manual slitting width adjustment reference. That’s cover bridge between slitter and cutter, while the production as a guide table. And when slitter width change there will be a space for man operation. F. Electric guillotine, Main Motor=5.5KW Press rolls before cut-off, working thickness=0.4~3.0mm The gap of cutter blades can be adjusted by cscale disk |
PLC Control cabinet one unit | Control the quantity & cutting length automatically. Combined with: PLC（Schneider）, Touch Screen（WEINVIEW）,Inverter(Schneider), Encoder（Omron）, etc Cut-to-length tolerance：≤±1.0mm Control voltage ：24V Portable controler for forward/backward/emergency stop |
Run-out table | Un-powered, Height Adjustable, 2 units, total length 7.3meter |
3. Product detail
1. Application: Packaging, building materials, home appliances, automobiles,
hardware and other industries.
2. Original: Xiamen, China
3. Certification: ISO9001, CE etc.
4. Price: Negotiable
5. Voltage: 380V 50Hz, the voltage can be as local demand
6. Payment term: TT, LC
7. Delivery date: Negotiable
8. Packing: Naked package with poly wood case for control box
9. Market: ASEAN/Middle East/ South Asia/North America/Russia
10. Warranty: 1 year
4. Certificates
5. Our factory
Our factory was established in 2014, which covers an area of MORE THAN 10,000 SQUARE METERS. With 20 YEARS PROFESSIONAL EXPERIENCE, Meanwhile, we are the main drafter standard of China Non-standard roll former manufacturer and exporter of high quality roll forming machines in China. We are an ISO9001 approved company, and have European CE certification
6. Advantage
1 Consultancy services
2. OEM/ODM (Original Equipment Manufacturer/Original Design Manufacturer) service
3. Use of only high-quality, custom-made equipment
4 Excellent value for money
5 The equipment setup is simple to select.
6 Prompt delivery
7. FAQ
1. What is the size of your factory in square meters?
More than ten thousand square meters.
2. How many employees do you have in your factory?
A total of 120 people are employed.
3. Do you have the machines on hand?
No, it isn't. All machines will be made according to your request.
4. What if the machine breaks down?
Our machine comes with a one-year guarantee. It's not because of human-caused damage to the parts. We provide a free replacement service. We will replace the item once the warranty term has expired.
8. EXHIBITIONS/MEETINGS
9. Direct Contact Information
Why choose us?
- As a leading manufacturer of Cut To Length Line products, we are constantly updating our technology and processes to provide our clients with the best possible products and services.
- Our company has a strong professional team with strong technical force and advanced features.
- We are a Chinese factory specializing in high-quality Cut To Length Line products and professional services.
- We have recruited more than 100 top professionals in the industry, and our products have been loved by consumers in just a few years.
- As a leading Chinese Cut To Length Line supplier, we have the expertise and resources to meet all your needs.
- Outside of work, we encourage all employees to pursue physical and mental health and the enrichment of personal life content.
- Our commitment to ethical business practices means that you can trust us to conduct our business with integrity and transparency.
- Pursuing sustainable development, maintaining a good corporate reputation, and assuming social responsibility are the basic values of our company.
- Our experienced team of professionals works tirelessly to ensure that every Cut To Length Line product we produce meets high standards of quality.
- With the continuous development of the market, our company has a rich range of Slitting and Cut To Length Line so far.
Hot Tags: slitting and cut to length line, China slitting and cut to length line manufacturers, Light Gauge Cut To Length Line, Cut To Length Line, Coil Cut To Length Line, Automatic Cut To Length Line, Coil Cutting Line, Simple Cut To Length Line Machine
You Might Also Like
Send Inquiry
